Brew Guides

Pour Over Coffee: A Simple Step-by-Step Guide

Hot water poured over ground coffee in a pour over filter

Quick answer

Use a medium (standard) grind, about 1 gram of coffee to 15 grams of water, water around 195 to 205°F, and aim for a total brew time of 2 to 4 minutes.

Pour over gives you control. You decide how fast the water goes in, and the paper filter catches oils and fine particles, so the cup tastes clean and lets single origin flavors come through.

What you need

  • A pour over dripper and paper filter
  • Standard grind coffee (or whole beans ground medium)
  • A kettle, ideally with a gooseneck spout
  • A scale and timer if you have them

The numbers

The National Coffee Association recommends a ratio between 1:13 and 1:16, water at about 93°C (around 200°F), and 2 to 4 minutes of contact time. A good starting point is 20 grams of coffee to 300 grams of water for one large mug.

Step by step

  1. Rinse the filter. Pour hot water through the empty filter to remove paper taste and warm the dripper. Discard the water.
  2. Add coffee. Add your grounds and level the bed with a gentle shake.
  3. Bloom. Pour about twice as much water as coffee (40 grams for 20 grams of coffee) and wait 30 to 45 seconds.
  4. Pour in stages. Pour slowly in small circles, keeping the water level steady, until you reach your total.
  5. Let it drain. The whole brew should finish within about 2 to 4 minutes.

Dialing it in

  • Drains too fast and tastes sour: grind a little finer.
  • Drains too slowly and tastes bitter: grind a little coarser.

Best Haluan coffees for pour over

Bright single origins are made for pour over. Try Kenya Nyeri, our single origins, or any coffee in standard grind.

FAQ

Do I need a gooseneck kettle?

It helps you pour slowly and evenly, but a regular kettle works if you pour carefully.

Why does my pour over taste weak?

Try more coffee, a slightly finer grind, or a slower pour so the water spends more time with the grounds.